examples
Air Conditioning Examples
Wall mounted
All systems that fix directly onto a wall at high level, normally returning the air via the front fascia and discharging the air via a single louvered discharge assembly at the top or bottom of the unit.
This system is among the most cost-effective solutions but is not so efficient or effective in larger, open-plan offices. This system ideally suits cellular offices up to 60 square metres.
Ceiling suspended
This version is usually of the same appearance as the floor mounted system and identical in operation. Floor mounted and ceiling suspended systems normally double up as one mode to suit both applications.
This system hangs directly beneath the ceiling and is especially effective where long throws are required. Generally, this is chosen as a substitute for a cassette where void space is not available.
Ceiling cassette
This system is ideally located centrally within the ceiling itself. The only part of the system visible is the grille which protrudes the ceiling by between 10 and 20 mm. All internal workings are hidden above the ceiling where 300 to 400 mm void space is required for access.
These systems return all air through the centre of the fascia and discharge through the sides. Its attributes of space saving and its ability to provide an even flow within large, open-plan areas make this a very popular option.
Other benefits are its very low noise levels, due to the reduced air velocity through the four sides which also helps reduce any draughts or dead zones. This system is one of the most aesthetically pleasing and efficient available.
Floor mounted
These systems are used where high-level wall space is valuable and no ceiling space is available. They return air via the front fascia and discharge air through the top louvered discharge assembly - ideal as a storage heater replacement.
These systems can be as effective as, say, a ceiling cassette in heat pump mode, but less so in the cooling cycle due to air flow characteristics.